Main product

Overview


SP100Mbps Series Small Form-Factor Pluggable Modules
The Allied Telesis 100Mbps SP Series offers the latest industry standard in flexible, full-duplex, Fast Ethernet connectivity. These hot-swappable interfaces simply plug into the SFP slot on all SFP-compatible products. Configuration can be optimized to meet a wide variety of distance and service requirements.

Options
Allied Telesis SP 100Mbps Series Small Form-Factor Pluggables (SFPs) offers short-haul and long-haul. This flexibility allows network managers to easily extend network distance and bandwidth.

Compatibility
SP 100Mbps Series SFPs are MultiSourcing Agreement (MSA)-compliant, and fully adhere to industry standard networking regulations. This allows the SP 100Mbps Series to be used with other MSA-compliant platforms that support SFP uplink connections.




At-a-glance


  • Compact size

  • Flexible architecture

  • MSA compliant

  • Plug and play for ease of use

  • Self-locking mechanism




Reasons to buy

  • Compact size
  • Flexible architecture
  • MSA compliant
  • Plug and play for ease of use
  • Self-locking mechanism

Specification

Technical Description: Allied Telesis B-AT-SPFX/2-90 network transceiver module Fiber optic 100 Mbit/s SFP
Certificates
Compliance certificates:
Trade Agreements Act (TAA)

Certification
Compliance certificates:
Trade Agreements Act (TAA)

Features
Easy to install:
Yes
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Form factor:The shape or design of the product.
SFP
Product colour:
Metallic

Operational conditions
Storage relative humidity (H-H):
0 - 80%
Operating relative humidity (H-H):
0 - 85%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Maximum operating temperature:
70 °C
Minimum operating temperature:
0 °C

Other features
RX sensitivity:
-31 dB
Transmit power range:
-20 - -14 dBmW

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Performance
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Fiber ethernet cabling technology:
100BASE
Ethernet interface type:
Fast Ethernet
Link budget:
11 dB
Rx wavelength (max):
1310 nm
Tx wavelength (max):
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
2000 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Single-mode fiber (SMF) supported:
No
Interface type:
SFP
Maximum data transfer rate:
100 Mbit/s
SFP transceiver type:
Fiber optic

Product details

AT-SPFX/2-90 Allied Telesis 0767035207728

Allied Telesis B-AT-SPFX/2-90 network transceiver module Fiber optic 100 Mbit/s SFP

£86.99 and In stock

SKU: AT-SPFX/2-90

Allied Telesis B-AT-SPFX/2-90 network transceiver module Fiber optic 100 Mbit/s SFP

Quick Code: Q404540 MPN: AT-SPFX/2-90
Best Seller
£86.99

Quantity:
In Stock

Key Features

  • Compact size
  • Flexible architecture
  • Plug and play for ease of use
  • Self-locking mechanism
  • MSA compliant