Main product

Overview


This 1310nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over singlemode optical fibre for a link length of 10km.

The SFP+ 10km module electrical interface is compliant with SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential.

Data lines are internally AC coupled. The module provides differential termination and reduces differential to common mode conversion for quality signal termination and low EMI.

SFI typically operates over 200mm of improved FR4 material or up to 150mm of standard FR4 with one connector.




At-a-glance


  • 1310nm DFB transmitter, PIN photo-detector

  • Electrical interface compliant with SFF-8431

  • Hot Pluggable

  • Low power consumption

  • Optical interface compliant to IEEE802.3ae 10GBASE-LR




Reasons to buy

  • 1310nm DFB transmitter, PIN photo-detector
  • Electrical interface compliant with SFF-8431
  • Hot Pluggable
  • Low power consumption
  • Optical interface compliant to IEEE802.3ae 10GBASE-LR

Specification

Technical Description: Cablenet CN-SFP-10G-LR-JUN network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm
Features
Brand compatibility:What other brands this brand can be used with.
Juniper
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Form factor:The shape or design of the product.
SFP+
Product colour:
Metallic

Logistics data
Country of origin:Country where the device is made.
China

Performance
Rx wavelength (max):
1610 nm
Rx wavelength (min):
1270 nm
Tx wavelength (max):
1355 nm
Tx wavelength (min):
1260 nm
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
10000 m
SFP transceiver standard:
LR
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
No
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

CN-SFP-10G-LR-JUN Cablenet 5056750320450

Cablenet CN-SFP-10G-LR-JUN network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

£19.99 and In stock

SKU: CN-SFP-10G-LR-JUN

Cablenet CN-SFP-10G-LR-JUN network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

Quick Code: Q1867654 MPN: CN-SFP-10G-LR-JUN
Best Seller
£19.99

Quantity:
In Stock

Key Features

  • Electrical interface compliant with SFF-8431
  • Hot Pluggable
  • 1310nm DFB transmitter, PIN photo-detector
  • Low power consumption