Overview



For extension of 4K UHDCloseUltra High Definition (UHD) is the resolution 3840x2160 pixels. What this means is that there are more pixels per inch (PPI) in a UHD display than a FHD (Full High Definition 1920x1080) display. This gives a higher resolution display and HDR transmissions over medium distances in residential or commercial applications, the EX-35-H2 features WyreStorm's dynamic compression and HDBaseT technology to deliver visually lossless, latency-free 4K/60 4:4:4 or HDR content, along with bidirectional control and 2-way PoH up to 35m/115ft or 1080p to 70m/230ft.

HDMI2.0 MAXED OUT
Knowing the speed at which technology moves, at WyreStorm we’re always looking ahead. That’s why we’ve implemented our VLC chipset (Visualy Lossless Compression) into this model meaning it’s ready for the next shift in content technology: 60Hz HDR and 4:4:4 60Hz.

HDCP 2.2 COMPLIANT
The latest 4K UHDCloseUltra High Definition (UHD) is the resolution 3840x2160 pixels. What this means is that there are more pixels per inch (PPI) in a UHD display than a FHD (Full High Definition 1920x1080) display. This gives a higher resolution display content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the EX-35-H2 supports the multi-point distribution of this content over HDBaseT.

SIGNAL RE-CLOCKING
Installers shouldn’t experience problems because of source equipment they have no control over. That’s why all extenders in the WyreStorm H2 family automatically “re-clock” the source signal, overcoming clock-stretching issues found in certain source devices.

FLEXIBLE INSTALL OPTIONS WITH 2-WAY POH
No 2 installs are the same; that’s why we’ve enabled all of the H2 extender line up to be powered from either the TX or RX, meaning maximum flexibility on-site without hunting for a mains outlet.




At-a-glance



  • 2-way PoH (Power over HDBaseT) enabling either transmitter or receiver to be remotely powered by the other unit

  • Advanced re-clocking chipset increases compatibility with new 4K UHDCloseUltra High Definition (UHD) is the resolution 3840x2160 pixels. What this means is that there are more pixels per inch (PPI) in a UHD display than a FHD (Full High Definition 1920x1080) display. This gives a higher resolution display source devices

  • Automatic EDID Management

  • Automatically adjusts equalization and amplification of signal for easy installation

  • Bidirectional IR and RS-232 pass-through

  • Compatible with the latest HDR standards, including HDR-10+, HLG content, with support for Dolby Vision up to 30Hz

  • Dynamic visually lossless compression enables extension of up to 4K/60 4:4:4 or HDR 60Hz content over HDBaseT

  • Energy efficient universal power supply include

  • HDBaseT Class B transmission of 4K up to 35m/115ft and 1080p up to 70m/230ft

  • HDCP 2.2 compliant

  • Slimline 21mm/0.83in chassis for easier, more convenient installation behind displays

  • Supports 2ch PCM and 7.1 multichannel audio up to DTS:X and Dolby Atmos

  • Supports all VESA resolutions within the HDMI 2.0 specification

  • Supports CEC communication between devices

  • Threaded bushings allow use of both standard and locking DC power plugs

  • Visual LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and HDBaseT link between devices




Reasons to buy


  • 2-way PoH (Power over HDBaseT) enabling either transmitter or receiver to be remotely powered by the other unit
  • Advanced re-clocking chipset increases compatibility with new 4K UHD source devices
  • Automatic EDID Management
  • Automatically adjusts equalization and amplification of signal for easy installation
  • Bidirectional IR and RS-232 pass-through
  • Compatible with the latest HDR standards, including HDR-10+, HLG content, with support for Dolby Vision up to 30Hz
  • Dynamic visually lossless compression enables extension of up to 4K/60 4:4:4 or HDR 60Hz content over HDBaseT
  • Energy efficient universal power supply include
  • HDBaseT Class B transmission of 4K up to 35m/115ft and 1080p up to 70m/230ft
  • HDCP 2.2 compliant
  • Slimline 21mm/0.83in chassis for easier, more convenient installation behind displays
  • Supports 2ch PCM and 7.1 multichannel audio up to DTS:X and Dolby Atmos
  • Supports all VESA resolutions within the HDMI 2.0 specification
  • Supports CEC communication between devices
  • Threaded bushings allow use of both standard and locking DC power plugs
  • Visual LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and HDBaseT link between devices

Specification


Technical Description: WyreStorm EX-35-H2 AV extender AV transmitter & receiver Black

Features
Certification:
CE | FCC | RoHS | RCM
Product colour:
Black
Bandwidth:Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
9.2 Gbit/s
Control type:The way in which the device is controlled.
Wireless
HDCP:High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.
Yes
HDCP & EDID bypass:
Yes
HDCP version:
2.2
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
Yes
Audio output channels:An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.
2.0 channels
HDCP pass-through:
Yes
IR pass-through:
Yes
RS-232 pass-through:
Yes
Extended display identification data (EDID):
Yes
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
70 m
Cable types supported:
Cat6, Cat6a, Cat7, HDMI
Maximum resolution:The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
4096 x 2160 pixels
Type:Characteristics of the device.
AV transmitter & receiver

Operational conditions
Operating relative humidity (H-H):
10 - 90%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 45 °C
Storage relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 70 °C

Ports & interfaces
Remote (IR) input:
1
Remote (IR) output:
1
HDMI in:Port (socket) for HDMI input.
1
HDMI version:
2.0
Number of HDMI outputs:
1
HDBaseT port:
Yes
RJ-45 output ports:
1
RJ-45 input ports:
1
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Yes
Connectivity technology:
Wired

Power
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Power consumption (max):The maximum amount of power used by the device.
8.88 W
Input current:
1 A
Operating voltage:Defines the range of operating voltages available
18 V

Technical details
Compliance certificates:
RoHS

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
360 g
Height:The measurement of the product from head to foot or from base to top.
17 mm
Depth:The distance from the front to the back of something.
90.2 mm
Width:The measurement or extent of something from side to side.
140 mm


Product details


EX-35-H2 WyreStorm 0814303013601

WyreStorm EX-35-H2 AV extender AV transmitter & receiver Black

£274.99 and In stock

SKUEX-35-H2

WyreStorm EX-35-H2 AV extender AV transmitter & receiver Black

Quick Code: Q2594726 MPN: EX-35-H2
£274.99

Quantity:
In Stock

Key Features

  • Bidirectional IR and RS-232 pass-through
  • Supports CEC communication between devices
  • HDCP 2.2 compliant
  • Automatic EDID Management
  • Energy efficient universal power supply include