Main product

Overview


CAT6a cables is an updated version of CAT6 cables. These cables enables a convenient and reliable connection from one network device, such as switch, modem or router, to another or to the infrastructure at large through a patch panel, keystone jack or wall outlet. This cable are also used a lot in small office and home network and entertainment applications. The cables are tested up to 500Mhz / 1000 Mbps (CAT6a standard) and are backwards compatible with CAT6, CAT5e and CAT5 cables. They are produced with snaggles (boot), which prevents the connector do be damaged when you install the cable through an installation with very less space. Furthermore these cables are manufactured with shielding. This protects against both EMI (electromagnetic interference). EMI can cause crosstalk between circuits, resulting in degradation of data, increased errors and slower transmission rates, but by using this shielded cable you will avoid this problem.




At-a-glance


  • CAT6a tested up to 500 MHz

  • LSZH (Low Smoke Zero Halogen)

  • S/FTP Shielding, protects against EMI (Electromagnetic interference)

  • suitable for Power over Ethernet (PoE/PoE+)

  • with gold plated PINs

  • with snagless,with slimline strain relief




Reasons to buy

  • CAT6a tested up to 500 MHz
  • LSZH (Low Smoke Zero Halogen)
  • S/FTP Shielding, protects against EMI (Electromagnetic interference)
  • suitable for Power over Ethernet (PoE/PoE+)
  • with gold plated PINs
  • with snagless,with slimline strain relief

Specification

Technical Description: Microconnect SFTP6A015BOOTED networking cable Grey 1.5 m Cat6a S/FTP (S-STP)
Certificates
Compliance certificates:
RoHS

Certification
Compliance certificates:
RoHS

Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Snagless cable boot:
Yes
Frequency:
500 MHz
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
10000 Mbit/s
AWG wire size:
27
Conductor material:
Copper
Conductor type:
Stranded
Jacket material:
Low smoke zero halogen (LSZH)
Connector contacts plating:What the connector contacts are covered with (layer on top).
Aluminium
Connector 1 gender:
Male
Connector 2 gender:
Male
Connector 2:This is the second connector in the device.
RJ-45
Connector 1:This is the first connector in the device.
RJ-45
Product colour:
Grey
Cable shielding:The protective layer for the cable, typically made of plastic.
S/FTP (S-STP)
Cable standard:The category of the cable, which is determined by performance characteristics and test requirements.
Cat6a
Cable length:How long the cable is.
1.5 m

Other features
Technical features:
Boot with kink protection, strain relief and latch protection

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package weight:Weight of the packaged product.
40 g

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
30 g
Outer diameter:
6 mm

Product details

SFTP6A015BOOTED Microconnect 8716065224863

Microconnect SFTP6A015BOOTED networking cable Grey 1.5 m Cat6a S/FTP (S-STP)

£11.99 and In stock

SKU: SFTP6A015BOOTED

Microconnect SFTP6A015BOOTED networking cable Grey 1.5 m Cat6a S/FTP (S-STP)

Quick Code: Q1614791 MPN: SFTP6A015BOOTED
£11.99

In Stock

Key Features

  • LSZH (Low Smoke Zero Halogen)
  • CAT6a tested up to 500 MHz
  • suitable for Power over Ethernet (PoE/PoE+)
  • with snagless,with slimline strain relief
  • with gold plated PINs